Re: 990fxa-gd80 bios on 990fxa-gd80 v2
Here is the page for compatability at G-Skil for the 990FXA-GD80.. http://gskill.com/configurator2.php?pid=2&model=1458Although I do see 16GB installed.. they are not listed... xmad seems...
View ArticleRe: 990fxa-gd80 bios on 990fxa-gd80 v2
get some ram that will be more compatable with your system like some ram from Corsair as we have seen from personal experiance they tend to be more compatable with MSI boards!
View ArticleRe: 990fxa-gd80 bios on 990fxa-gd80 v2
I agree that setting are not a problem unless you changed something to cause Single Channel Mode? The memory you have is not listed as compatable.. you have them in the correct slots.Corsair is...
View Articlecannot boot laptop
New laptop. Came with 2X60SSD RAID0 setup and a HDD. Does not want, so reinstalled windows 7 onto one SSD. If I put the remaining SSD and HDD into a raid configuration windows boots fine from the SSD;...
View ArticleRe: 560ti TF2 1g OC possible issues
Any update for GPU2? I will install GPU1's update and report back. Should I just run the same Heaven tests or would you suggest any other tests I can run?
View ArticleRe: Z77A-G45 not detecting graphics cards in PCI-E slot.
When in the UEFI/BIOS, is the graphics mode saving and holding correctly at Save and Exit when switching from IGD (onboard) to PEG (discrete) function?
View ArticleRe: Z77A-G45 not detecting graphics cards in PCI-E slot.
I go into the BIOS/UEFI and it's saving it to stay at whatever I set it to (PEG). Also has the following settings on that screen:- Integrated Graphics Share Memory - 64M.- DVMT Memory - 256MB.- IGD...
View ArticleClik here to view.
Re: Z77A-G45 not detecting graphics cards in PCI-E slot.
Rare indeed that both PCI-E 3.0 16X33 slots would be dead like that. Maybe I am missing something to try.
View ArticleRe: Z77A-G45 not detecting graphics cards in PCI-E slot.
Yeah, I'm totally lost for solutions. I may have to take it to the store I got it from and see if they can have a look but that'll be another week at least :(If I absolutely knew for sure that the...
View ArticleRe: MSI Z77-GD65 - 0.00 GHz in BIOS - boot looping
I wrote, BIOS version is last available 10.6. I have never had Sandy Bridge Procesor.I check pins again. I do not see problem.
View ArticleRe: Intel ME Driver 7.1.52.1176-does not install
If no hardware has been changed, I doubt it is bio related. (I'll put the file together as requested when I get to the office)What exactly is going on? Does this lock-up happen during gaming? What...
View ArticleRe: MSI 760GM-P23 (fx) not loading
QuoteInstalled everything, put in my old hard drive to boot it up.This:Quote If you expect help it would be good for you to answer questions asked. We don't care about somebody elses problem we are...
View ArticleRe: R7950 Twin Frozr 3GD5/OC Bios Update
What is your S/N and are you able to upload a copy of your vbios somewhere and link to it?<<<ATI FLASH>>>Place the program somewhere easy to navigate.Open an elevated insta...
View ArticleHow can i flash to bios older version
Hi guysi already saw some one with this problem but i cant get it to work.i have a Z68A GD80-B3 and updated to bios 20.0 having a 2600K (didnt see the leters saying Ivebridge) =(tried to get it back...
View ArticleRe: How can i flash to bios older version
http://forum-en.msi.com/index.php?topic=161586.0Reply#2 >>Use the MSI HQ Forum USB flasher<<
View ArticleRe: Msi Gtx 680 Twin Frozr, cold boot noise
S/N of the card..?also save current vbios with nvflash: >>Download NVFLASH for windows<<syntax: nvflash -b myrom.rom [ENTER]then upload myrom.rom somewhere and give ...
View ArticleRe: Msi Gtx 680 Twin Frozr, cold boot noise
Rma card? But like i say its very rarely, hard to see it. A few times pc can boot normal quiet, sometimes not. I dont know where is the reason.
View ArticleRe: MSI N660 TF 2GD5/OC with MB MSI 990FXA-GD80 uncooperative / no signal
reflash card vbios to attached version and will be fine
View ArticleClik here to view.
Re: MSI N660 TF 2GD5/OC with MB MSI 990FXA-GD80 uncooperative / no signal
Ps: excellant first post
View ArticleRe: K9AGM2 FIH USB Code Error 43 Windows
Checked out article Stu. I only have 4 wires connected and not 5. The front display panel of the Antec Fusion is connected to JUSB1 and the second is connected to JUSB3 and the 2 front USB panel ports....
View Article